INDX Tool- FDM-printable replacement shell (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
work in progress FDM-printable shell for INDX tools
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 330
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
WORK IN PROGRESS I do not expect this to work off the bat- print for testing purposes and give comments- I do not have an INDX toolhead so cannot test it!
FDM printing optimized version of INDX tool shell. Intended for use if you happen to break the bottom half of the sls shell. Uses an ECAS04 fitting with snap fit geometry for easy insertion.
You will need the original hotend hardware (spring, hotend, circlip) as well as the 3mm pins on the front (which I think are glued in?) and a 2mm pin for the kinematic mount lock- let me know if it is too low or high or the pin is actually smaller, this is the part I am least sure about