1 / 1
tenlog d3-pro left extruder cover - single 5015 dual side fan duct/shroud + optional microprobe mount (hictop d3 hero / reayou idex tl-d3) — zdjęcie 1

tenlog d3-pro left extruder cover - single 5015 dual side fan duct/shroud + optional microprobe mount (hictop d3 hero / reayou idex tl-d3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

⠀

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use https://github.com/klack/LuxuriMarlin/wiki/BL-Touch as a reference).

I designed this cover for a 4020 heatsink fan but 4010 should work too.

BOM:

  • 6 m3 square nuts (5.43x5.43x1.9)

  • 2 m3 bolts 26mm for 4020 heatsink fan (14mm for 4010)

  • 2 m3 20mm bolts for 5015 nozzle fan

  • 2 stock bolts for extruder cover

Optional (microprobe mount):

  • +1 m3 square nuts (5.43x5.43x1.9)

  • 2 m3 bolts 38mm (28mm for 4010)

  • 2 m3 bolts 8-10mm

  • probe offset: x=-2.1, y=49.5

Print recommendations:

  • arachne wall generator

  • 0.2mm layer height

  • 0.4mm for outer and inner walls

  • 2 wall loops, 7% honeycomb infill

  • supports are optional but recommended

  • print orientation:

Tagi