tenlog d3-pro left extruder cover - single 5015 dual side fan duct/shroud + optional microprobe mount (hictop d3 hero / reayou idex tl-d3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use https://github.com/klack/LuxuriMarlin/wiki/BL-Touch as a reference).
I designed this cover for a 4020 heatsink fan but 4010 should work too.
BOM:
6 m3 square nuts (5.43x5.43x1.9)
2 m3 bolts 26mm for 4020 heatsink fan (14mm for 4010)
2 m3 20mm bolts for 5015 nozzle fan
2 stock bolts for extruder cover
Optional (microprobe mount):
+1 m3 square nuts (5.43x5.43x1.9)
2 m3 bolts 38mm (28mm for 4010)
2 m3 bolts 8-10mm
probe offset: x=-2.1, y=49.5
Print recommendations:
arachne wall generator
0.2mm layer height
0.4mm for outer and inner walls
2 wall loops, 7% honeycomb infill
supports are optional but recommended
print orientation:



