1 / 2
Nape Pro Riser / Stand — zdjęcie 1
1 / 2

Nape Pro Riser / Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a riser / stand for the Nape Pro. It raises the trackball 44mm, slightly above my tented split keyboard.

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I keep my Nape Pro between the two halves of my tented Kinesis keyboard, and I found that I prefer for it to be raised slightly above the keyboard height. This raises the trackball by 44mm, but you could likely scale the model up or down to different heights. 

Tagi