1 / 4
IBC Water Tote Cap with Swivel Hose Adapter — zdjęcie 1
1 / 4

IBC Water Tote Cap with Swivel Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-in-place top fill cap with a swiveling garden hose adapter and optional plug/cover. No supports needed!

Ocena
0 / 5
Polubienia
9
Pobrania
48
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I lost the original cap for the 350 gallon tote (someone forgot to screw it back on and then drove off with it on a trailer... did I say "me"?  No, couldn't have been me).  Was the perfect excuse to design this replacement which adds a garden hose adapter that I had been wanting to make, to stop the hose from wriggling around and possible working its way out of the tote while filling (did I say "me" again?).

The cap itself is 160mm (~6 inch) size and the threads are simplified from the buttress-style that the male threads have - I made them symmetrical and so it is quite a loose fit, but the cap screws all the way down to the top surface of the tote and so seems pretty secure.  With the looseness of the cap threads and the swivel adapter the tote is no longer completely air tight but for my purposes that's fine.  Bear that in mind depending on your use case.

There's an additional strapped stopper plug that I printed out of TPU and fits over the connector to always stay attached.  That way the cap and adapter shouldn't normally need to be unscrewed and removed. UPDATE: I added a hexagonal cover that fits snugly over the connector, as the plug did not fit very well.

Tagi