netool.io Pro2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case fits the netool.io Pro2 and it's optional RConsole cable along with a 6" skinny CAT6 cable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits: Pro2 (107.95 x 44.45 x 19.05 mm per official datasheet), 6 ft Rconsole cable + 6" patch cable coiled in the 17 mm moat around the device island. Outer size: 153.8 x 90.3 x 26.6 mm.
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15% infill
Both parts print flat as oriented — no supports (groove roof is a 1.6 mm micro-bridge)
Lid: print serrations-up, 4 walls or ~40% infill for stiffness
Turn on elephant-foot / first-layer horizontal compensation (~0.2 mm), or the lid will be tight in the groove
Built-in clearances (edit in .scad and re-export if your printer runs tight/loose)
Param | Value | What it does |
|---|---|---|
| 0.5 /side | device pocket fit |
| 0.3 /side | lid width vs groove |
groove vs lid thickness | 0.3 | vertical lid float |
| 0.45 | detent click strength (sand bumps if too stiff) |
Features
Sliding lid, opens from the serrated end; detent bumps click into lid divots so it won't creep open in a bag
Thumbnail scoop under the lid's front edge
20 mm hole in the base to push the Pro2 out; pinch scallops on the island sides
Regenerate/tweak:
openscad -o body.stl -D 'part="body"' netool_case.scad(same for"lid")