LayersFactory
Report model
1 / 1
netool.io Pro2 Case — image 1

netool.io Pro2 Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ntwrk80

ntwrk80

@ntwrk80_62832

This case fits the netool.io Pro2 and it's optional RConsole cable along with a 6" skinny CAT6 cable.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Computers
License
Creative Commons — Attribution — Noncommercial
DetailsFiles (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (0)Related

Fits: Pro2 (107.95 x 44.45 x 19.05 mm per official datasheet), 6 ft Rconsole cable + 6" patch cable coiled in the 17 mm moat around the device island. Outer size: 153.8 x 90.3 x 26.6 mm.

Print settings

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15% infill

  • Both parts print flat as oriented — no supports (groove roof is a 1.6 mm micro-bridge)

  • Lid: print serrations-up, 4 walls or ~40% infill for stiffness

  • Turn on elephant-foot / first-layer horizontal compensation (~0.2 mm), or the lid will be tight in the groove

Built-in clearances (edit in .scad and re-export if your printer runs tight/loose)

Param

Value

What it does

pocket_clr

0.5 /side

device pocket fit

lid_side_clr

0.3 /side

lid width vs groove

groove vs lid thickness

0.3

vertical lid float

bump_h

0.45

detent click strength (sand bumps if too stiff)

Features

  • Sliding lid, opens from the serrated end; detent bumps click into lid divots so it won't creep open in a bag

  • Thumbnail scoop under the lid's front edge

  • 20 mm hole in the base to push the Pro2 out; pinch scallops on the island sides

  • Regenerate/tweak: openscad -o body.stl -D 'part="body"' netool_case.scad (same for "lid")

Tags

casenetwork