Bolt catch fix for WE-tech SCARs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printed shim to fix weak or inconsistent bolt catches on WE-tech SCAR-L V1 and V2 airsoft rifles.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
V1 and V2 WE-tech scars often have issues with the bolt catch being inconsistent. The culprit of this issue is usually the bolt catch arm being slightly too thin for the stop on empty function of the magazine to push it up all the way. This printed piece goes around the outside of the bolt stop arm to make it thicker, allowing the stop on empty arm to push it up enough to grab the bolt properly.
WE-tech's new V3 scars have a completely different bolt catch design, so this is not compatible with those new gen rifles. I printed this for my V2 scar, but it should also work fine on V1s. It should just slide on and stay via friction, but you can use glue if it ends up coming loose over time.