1 / 3
Mercedes Benz W124 - Sacco Trim Sun Visor Holder Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sacco trim sun visor "holder" bracket.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone,
Here is a Sacco trim sun visor holder bracket. I recommend printing in ASA, or PETG - definitely not PLA (cabin heat!).
This is a very functional part, because it has to withstand forces from multiple rotation's of the sun visor, I recommend to print it with the most "tough" settings as possible.
I have rotated the model by 60 degrees by design - if it's printed flat, the print layer lines are exactly where all of the forces are, resulting in the holder to snap.
