HP EliteDesk 800 G5 SFF to 2U Rackmount Case Swap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repurpose your HP EliteDesk 800 G5 SFF into a fully functional 2U rackmount server
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D printable case allows you to move the proprietary motherboard and power supply from the standard Small Form Factor (SFF) chassis into a custom, rack-mountable enclosure. It features space for dual 3.5" hard drives utilizing standard Dell server caddies and includes mounting for an 80mm cooling fan to keep your storage temps in check.
Important Build Notes
PSU Cables: The signal cables for the power supply need to be lengthened to reach the motherboard in this new layout.
Tolerances: This case was designed with very tight tolerances. Depending on your printer's calibration and the material you use (shrinkage), some light filing or sanding may be required for a perfect fit.
Assembly: The case lid can either be bolted together (using the optional M4 hardware) or permanently glued. For all my glue joints, I used a standard 5-minute two-part epoxy for maximum strength.
Bill of Materials
Fasteners & Inserts:
8x M3x4x5 mm heat-set inserts (for motherboard standoffs)
8x M3x4 mm screws (for securing the motherboard)
4x M3x10 mm screws (for mounting the SATA couplers)
4x #6-32 UNC screws (for securing HDDs)
8x M4x8 mm nuts and bolts (Optional - for securing the lid if you prefer not to glue it)
Hardware & Electronics:
1x Low Profile CPU Cooler (I used the Thermalright AXP90-X53)
1x 80mm Fan (for HDD cooling)
2x SATA Male to Female Power/Data Converters
2x 3.5" Dell Server HDD Caddies (You can buy these or 3D print your own.)
Credits & Remix References
This design references and builds upon some excellent work by other creators in the community. Huge thanks to them:
10-inch Rack 1U 2 x 3.5 inch HDD Hot-Swap by Tig3rch
https://www.printables.com/model/1290788-10-inch-rack-1u-2-x-35-inch-hdd-hot-swap
ATX PSU Adapter for Elitedesk and Prodesk SFF by The_3D_Llama
https://www.printables.com/model/355679-atx-psu-adapter-for-elitedesk-and-prodesk-sff
Dell Poweredge 3.5" Drive Caddy R710-R730 by dbpag
https://www.thingiverse.com/thing:7234593
Photo Gallery





