Nvidia CMP 170HX / A100 Fan shroud - 80MM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud to attach a 80MM fan to a Nvidia CMP 170HX / A100 GPU
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 214
- Wydruki
- 1
- Wyświetlenia
- 782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used.
First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and then screw in the fan using 4 fan screws. It's hard/impossible to screw in the two shroud screws with the fan installed and also the power cable might not be possible to unplug without removing the shroud. (Not the best design but i wanted to maximize the are that the fan can push the air through)
Ideally used with a high static pressure and high airflow fan like the Arctic S8038-10K