Sherpa "Extra Lovely" Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sherpa "Extra Heavy" but more lovely! 💖
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the Sherpa Extra Heavy. I found that the original Sherpa Extra Heavy housing was too small for the BMG gear kit I ordered, which seems to be a common issue with the Sherpa Extra Heavy design. This remix has a slightly larger housing (1.4mm) to accommodate the BMG gear kit, and also includes some aesthetic changes to make it more "lovely".
If you're flying the extruder on a delta print, you'll need to print the flying-extruder-mount.stl. I suggest using hair elastics and zip ties to secure the mount to the carriages.
I've also included a mounting assembly that will allow you to setup the extruder in a Bowden configuration, mounted to the outside of the frame at a 45 degree angle. If you prefer this approach, print the 45deg-tower-mount.stl and the mounting-plate.stl.
Bill of Materials
See the extruder BOM and the generated compiled BOM.
Design Source
https://www.tinkercad.com/things/eVswxnjzAfZ-sherpa-extra-lovely