Sherpa "Extra Lovely" Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Sherpa "Extra Heavy" but more lovely! 💖
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the Sherpa Extra Heavy. I found that the original Sherpa Extra Heavy housing was too small for the BMG gear kit I ordered, which seems to be a common issue with the Sherpa Extra Heavy design. This remix has a slightly larger housing (1.4mm) to accommodate the BMG gear kit, and also includes some aesthetic changes to make it more "lovely".
If you're flying the extruder on a delta print, you'll need to print the flying-extruder-mount.stl. I suggest using hair elastics and zip ties to secure the mount to the carriages.
I've also included a mounting assembly that will allow you to setup the extruder in a Bowden configuration, mounted to the outside of the frame at a 45 degree angle. If you prefer this approach, print the 45deg-tower-mount.stl and the mounting-plate.stl.
Bill of Materials
See the extruder BOM and the generated compiled BOM.
Design Source
https://www.tinkercad.com/things/eVswxnjzAfZ-sherpa-extra-lovely