VMAX handlebar spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small spacer clip to stop the hand grip from moving
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
On my VX2, there is a gap on the left side of the handle that makes the rubber grip move. According to the manufacturer, this is on purpose, so you can install a phone mount or other gear. However, I needed something to keep the rubber grip from moving, so I designed this little spacer clip. This will probably fit other VMAX scooters as well, possibly even other manufacturers.
I printed this in Galaxy Green PLA for testing purposes, but since an e-scooter will be outside a lot, I will eventually print it in PETG. I used 15% infill and no supports and even in PLA, it clips on just fine. The print in the photo is draft quality with a layer height of 0.28 mm.