Liczymy pasujące modele…
The definition of power in '85 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Install under File > Import > Import Configuration If you are satisfied, please give a like. Thanks
Easy to print without any supports. Just assemble with a bit of glue on the connector and a bit between the two faces. If you're doing color changes at height, the white part is 1.55mm thick, so change to black after that. Remember to…
Sy's Peglock-based mounts for Kobalt 24vMax battery charger(s). This is a remix of a remix. 2 mounting plates for top and bottom screw locations built into the back charger. PRINT BOTH PLATES! They are not identical - the bottom has an…
small keychain for Yamaha vmax 1700. print at 100% infill . …. or you can buy from eBay click the link. also have 1200 available. thanks yamaha vmax 1700 keychain | eBay
This clip replaces the original clip on the back of NiteRider Vmax (and possibly other) tail lights, making them compatible with Planet Bike light mounts. I made this because I have many Planet Bike rear lights, and all my family's bikes…
A bracket that provides a proper fixture of the Chiclew Scooter bag to a VMAX New VX2 (Hub/Gear). Tighten the screws only until the bracket is properly seated. A gap between the clamp and the slider parts is intentional and part of the…
when you put a stage 7 kit on the vmax, the original bottle design uses hoses that gets brittle over time. designed a new breather bottle that can be used in a bunch of different arrangements for hose configuration. you will have to come…
Build info here , if you have questions ask! Model Preview here
The geometry of my results of measurements of the VMAX New VX2 (Gear/Hub) steering strut. It allows to design own parts in CAD for the E-Scooter such as brackets for bags or locks If you have any comments, suggestions or similar, you are…
in the picture, i used the settings: 0.4mm nozzle 0.2mm layer height wall loops: 2 material: BambuLab TPU 95A HF with the 95A profile (instead of the 95A HF profile)
This cap makes it easier to cover the exhaust and intake ports for painting or storage. Reuse hardware to attach.
This mount provides a secure hold and use-friendly orientation when attaching a Porter Cable 20Vmax Rapid Charger to OmniWall panels. There are 3 holes that align with the board's round holes in case extra security is desired. I suggest…
Flaps detent system for Virpil CDT VMAX (haven't tested with Prime). You will need need: 1 Hex Socket Spring Ball Plunger M5x12mm (Or M5x10) 2 Screws M3x6mm countersunk. Tapping kit (M3 and M5) - optional Assembly: - Remove Rubber handle…
A bracket that provides a proper fixture of the Chiclew Scooter bag to a VMAX New VX2 (Hub/Gear). Tighten the screws only until the bracket is properly seated. A gap between the clamp and the slider parts is intentional and part of the…
The geometry of my results of measurements of the VMAX New VX2 (Gear/Hub) steering strut. It allows to design own parts in CAD for the E-Scooter such as brackets for bags or locks If you have any comments, suggestions or similar, you are…
Printed and tested in PA-CF, simulated a 500lb load on the part in Solidworks, just deformed, didn't snap. Tolerances are extremely tight, 0.12mm on the hinge walls, must have a dialed in printer. Slicing instructions (Orca): Import both…
Makita 40Vmax XGT track saw arbor dust cover, snag fit. I use PLA, should be ok with PTEG as well. It is not load bearing so feel free to use whatever quality to print. Support is needed for this version, but you dont need to remove it…
Designed this for Protection if the Scooter falls on the Side with the Turning Signal. Printed with TPU 85
