Personalized Address Sign

Create a personalized address plaque for your home entrance.

The design includes a decorative curved frame, olive branches and pomegranate details. The center area can be used for a family name, house number, apartment number or another short custom message.

The included STL contains the placeholder text “Your Text” and is intended to be personalized before printing.

MODEL DIMENSIONS

Width: 250 mm

Height: 180 mm

Thickness: 8.5 mm

The model requires a build area of at least 250 × 180 mm when printed at 100% scale.

PRINTER SIZE NOTE

The model will not fit at full size on a standard 220 × 220 mm build plate.

For a 220 mm-wide build plate, scale the model to approximately 88%.

Approximate dimensions at 88% scale:

220 × 158.4 × 7.5 mm

RECOMMENDED PRINT SETTINGS

Material:

PETG or ASA recommended for outdoor use.

PLA can be used for indoor display or test prints.

Nozzle diameter: 0.4 mm

Layer height: 0.20 mm

Walls / perimeters: 3

Infill: 10–15%

Top and bottom layers: 4–5

Supports: Not required

Scale: 100%

PRINT ORIENTATION

Place the plaque flat on its back, with the decorative surface and text facing upward.

No supports should be required in this orientation.

MULTICOLOR PRINTING

The model is suitable for multicolor printing.

Colors can be added using:

• AMS, MMU or another multicolor system

• Slicer color painting

• Manual filament changes

• Painting after printing

For the best result, use contrasting colors for the background, frame, decorative lines, leaves, pomegranates and text.

OUTDOOR USE

PETG or ASA is recommended for outdoor installation.

PLA is better suited for indoor use because prolonged exposure to direct sunlight and heat may cause fading or deformation.

INSTALLATION

The model does not include mounting holes.

It can be installed using outdoor-rated double-sided mounting tape, construction adhesive or another mounting method suitable for the wall surface.

Please share photos of your personalized signs and printed makes!