Pixhawk ESC adapter - Integration module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my ZD550 I was looking for a way to mount 30x30 ESC in 45x45 pattern.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
If you've ever built a Pixhawk-based UAV, you know how quickly wiring can become one of the most frustrating parts of the project. More boards, more cables, more connectors—and every addition makes assembly, troubleshooting, and maintenance more time-consuming.
I'm working on a compact integration module that brings several essential functions into a single assembly, making UAV builds cleaner, faster to assemble, and easier to service.
This part is useful for Pixhawk 6C/6X builds or similar but breaking the tabs designed for the PWM modules makes it a simple adapter to mount 30x30 ESC in 45x45 mounting pattern. You can even mount your flight stack if that's what your build uses.
Recommended hardware is:
M3x4 threaded inserts
M3x25 low profile screws for stack
M3x6 standoffs
Self-locking nuts
My build includes:
• Integrated 4-in-1 ESC (Sequre Blueson A2)
• Regulated 5V & 12V power outputs for payloads and auxiliary electronics
• Dual Pixhawk PWM extension board
If you need additional variations (e.g. for 20x20 ESC's let me know and I will upload another STL)
***Caution: I own the B-cube PWM modules and haven't tested the fitment of the Holybro model. The dimensions were taken from the Holybro website. If you test it please leave a comment.