Paste extruder to suit XChange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An open source paste extruder, designed to suit the XChange tool plate from printermods.com, but can be mounted on any…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
An open source paste extruder, designed to suit the XChange tool plate from printermods.com, but can be mounted on any machine using a square 31mm pattern.
Uses a cheap, easy to find 80ml syringe: https://www.supercheapauto.com.au/p/orcon-orcon-2-stroke-oil-mixing-syringe---80ml/215731.html
Inspired by but using no geometry from the PiuLabs paste extruder: https://www.thingiverse.com/thing:482873
Companion video: https://youtu.be/E6TGv0fRg-w
Right click on the parts in the lower left to export in whatever format you like.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament: X3D PLA Black
Notes:
No support required. Three single layer sacrificial walls need to be drilled through as shown in video.
Hardware list:M3 locknut x 10
M3 x 50mm x 3
M3 x 35mm x 3
M3 x 12mm x 7 (must be cap head for clearance)
M3 x 10mm x 5 (must be cap head for clearance)
M3 x 6mm x 2 (must be cap head for clearance)
M3 grubscrew x 2
8mm leadscrew and nut, approx 170-200mm in length
608 skateboard bearing x 2
680 ohm resistor (or close) to act as a dummy thermistor.
Machine screw reference: https://store.curiousinventor.com/wp-content/uploads/2019/09/machine_screws3.jpg
Assembly instructions in accompanying video.
Category: 3D Printer Extruders