Paste extruder to suit XChange
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An open source paste extruder, designed to suit the XChange tool plate from printermods.com, but can be mounted on any…
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 49
- Makes
- 0
- Views
- 871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
An open source paste extruder, designed to suit the XChange tool plate from printermods.com, but can be mounted on any machine using a square 31mm pattern.
Uses a cheap, easy to find 80ml syringe: https://www.supercheapauto.com.au/p/orcon-orcon-2-stroke-oil-mixing-syringe---80ml/215731.html
Inspired by but using no geometry from the PiuLabs paste extruder: https://www.thingiverse.com/thing:482873
Companion video: https://youtu.be/E6TGv0fRg-w
Right click on the parts in the lower left to export in whatever format you like.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament: X3D PLA Black
Notes:
No support required. Three single layer sacrificial walls need to be drilled through as shown in video.
Hardware list:M3 locknut x 10
M3 x 50mm x 3
M3 x 35mm x 3
M3 x 12mm x 7 (must be cap head for clearance)
M3 x 10mm x 5 (must be cap head for clearance)
M3 x 6mm x 2 (must be cap head for clearance)
M3 grubscrew x 2
8mm leadscrew and nut, approx 170-200mm in length
608 skateboard bearing x 2
680 ohm resistor (or close) to act as a dummy thermistor.
Machine screw reference: https://store.curiousinventor.com/wp-content/uploads/2019/09/machine_screws3.jpg
Assembly instructions in accompanying video.
Category: 3D Printer Extruders