YASSA (Yet Another Silly Shell Adaptor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nerf blaster barrel to Sillybutts Silly Shell adaptor with Thanhtacles Twicelock collet
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
I have rocked the crap out of sillyshell adaptors at my home club, pretty much always slapped to the face of a Fury-X. As part of an effort to upgrade my Fury-x setup, I decided to make my own sillyshell adaptor. This is also a personal experiment to test out the Twicelock collet, which is turning out quite well. Big thanks to Sillybutts & Thanhtacles.
Features
Shoot-Through Capability | Don't worry about taking the adaptor on and off mid battle! Fire darts straight through and avoid clipping from misalignment thanks to twice lock stability! |
|---|---|
Adjustable Shell Bite | Adjust the left and right screw tension to adjust how tight the front of the adaptor is on, allowing for easier ejection or better shell retention depending on your goals |
Secure, Minimal, and Flush Collet | Twicelock collet looks good, is super small, and catches on the barrel in 3 places for maximal security. |
Hardware
2x 016 O-Rings. Collet O-Ring is optional but recommended
2x M3x4 Heat set Inserts (For heat set version)
2x M3 Nuts (For Nut Version)
2x M3x12 SCHS or buttonhead screw
1x M3x20 SCHS or buttonhead screw
Print Settings
You will need to print all files not in a folder, and then one file of your choice from each folder (ie: pick an ejector and a backend). I printed with 4 walls @ 20% infill for all pieces, but 3 walls should be fine.