1 / 4
YASSA (Yet Another Silly Shell Adaptor) — image 1
1 / 4

YASSA (Yet Another Silly Shell Adaptor)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nerf blaster barrel to Sillybutts Silly Shell adaptor with Thanhtacles Twicelock collet

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

I have rocked the crap out of sillyshell adaptors at my home club, pretty much always slapped to the face of a Fury-X. As part of an effort to upgrade my Fury-x setup, I decided to make my own sillyshell adaptor. This is also a personal experiment to test out the Twicelock collet, which is turning out quite well. Big thanks to Sillybutts & Thanhtacles. 

Features

Shoot-Through Capability

Don't worry about taking the adaptor on and off mid battle! Fire darts straight through and avoid clipping from misalignment thanks to twice lock stability!

Adjustable Shell Bite

Adjust the left and right screw tension to adjust how tight the front of the adaptor is on, allowing for easier ejection or better shell retention depending on your goals

Secure, Minimal, and Flush Collet

Twicelock collet looks good, is super small, and catches on the barrel in 3 places for maximal security. 

Hardware

2x 016 O-Rings. Collet O-Ring is optional but recommended

2x M3x4 Heat set Inserts (For heat set version)

2x M3 Nuts (For Nut Version)

2x M3x12 SCHS or buttonhead screw

1x M3x20 SCHS or buttonhead screw

Print Settings

You will need to print all files not in a folder, and then one file of your choice from each folder (ie: pick an ejector and a backend). I printed with 4 walls @ 20% infill for all pieces, but 3 walls should be fine. 

Tags