1 / 5
Prusa mk3s mk25s BMG Bondtech Delta-P Duct with LED mounts — zdjęcie 1
1 / 5

Prusa mk3s mk25s BMG Bondtech Delta-P Duct with LED mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Delta-P Duct for my modified Marcoz76 BMG Prusa MK3S MK2.5S extruder

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
75
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing , thanks.

My previous extruder body on the Mk2.5s i used a modified version of the Delta-P for many years as it allows visibility of the nozzle and very good bridging and balanced airflow either side of the nozzle , while the stock duct on the BMG you cant see the nozzle when its printing first layer and that fan sticks out so far it was knocking my X mount camera and its not got balanced airflow, it was a little tight to get it on the new BMG with the stepper position so had to make some angle adjustments and integrated the 5015 fan mount and turn my extruder motor so the JST PH connector was not facing down which gets in the way which is only an issue if your pancake stepper has a direct cable type wont be a problem but its very easy to just rotate the stepper motor so the wires come out on a different side.
My prototype printed in Polycarbonate carbon fiber, performance has been excellent and improves bridging over the stock duct i will have to photo the bridging tests i did.

Build Notes : 

Mounts onto my modified BMG extruder front with two M3 10 screws , fan mounts with recessed M3 hex nuts and two M3x23mm bolts.

You will need to be using my modified front half of MarcoZ67 BMG extruder found here for the two screw hole mount for the duct :
https://www.printables.com/model/1784174-updated-marcoz76s-bondtech-bmg-prusa-mk3smk25s-for

Prints now with no added supports , suggest print in ASA ABS PC for heat tolerance , 25% infill , 2-3 perimeters. 

Versions:

V2.2 Updated support around nut holes for fan mount and a few other bits of model tidy up.

V2.3 Updated further cleanup of model extended fan support and better printability.

Feel free to leave feedback post a make or buy me a coffee enjoy .

Tagi