House Air Vent Insert + Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement air vent for houses. Print in PETG or ASA for heat and uv resistance.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement air vent for homes. I had some that were missing and instead of buying I decided to 3d print them, because why not?
Dimensions:
Insert: 11.75mm (width) x 80.75mm (length) x 10mm (height)
Cover: 8mm (width) x 74mm (length) x 3mm (height)
Instructions & Tips
Print in either PETG or ASA for heat resistance. Mine were out of PETG, the ones that don't get any sunlight on them are fine, but the ones that do are all broken or bent. So choose the filament wisely).
I've had to file the holes in the house a tiny bit so they would fit, but some persuasion should also do the trick ;)