Drakkar DualSense holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mounted Viking-themed holder for the PlayStation 5 DualSense controller.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
A Viking-themed holder for the PS5 DualSense controller. The base of the holder is shaped as a drakkar with a wolf's head on the prow. The wall-mounted backplate is covered with a vegvísir symbol. Can stand on a table but was designed to be mounted on a wall.
The holder on the photos was printed with woodfill PLA, 0.6mm nozzle, 0.25mm layer height. The model has slight overhangs. It can be printed without supports, but I prefer adding supports for the shields and the corners of the bottom. The 3MF file contains a model positioned so that it fits on the Core ONE bed; it also includes some paint-on supports and a modifier for an increased infill for the rear section that attaches to the wall.
The holder is designed to be wall-mounted with two screws spaced vertically at a distance of 65mm (4.5mm wood screws or slightly smaller). The lower screw is hidden and has to be prepared in advance; it prevents the holder from rotating on the top screw. You can use only the top screw with some sticky tape or by tightening it slightly more.