Drakkar DualSense holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall-mounted Viking-themed holder for the PlayStation 5 DualSense controller.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
A Viking-themed holder for the PS5 DualSense controller. The base of the holder is shaped as a drakkar with a wolf's head on the prow. The wall-mounted backplate is covered with a vegvísir symbol. Can stand on a table but was designed to be mounted on a wall.
The holder on the photos was printed with woodfill PLA, 0.6mm nozzle, 0.25mm layer height. The model has slight overhangs. It can be printed without supports, but I prefer adding supports for the shields and the corners of the bottom. The 3MF file contains a model positioned so that it fits on the Core ONE bed; it also includes some paint-on supports and a modifier for an increased infill for the rear section that attaches to the wall.
The holder is designed to be wall-mounted with two screws spaced vertically at a distance of 65mm (4.5mm wood screws or slightly smaller). The lower screw is hidden and has to be prepared in advance; it prevents the holder from rotating on the top screw. You can use only the top screw with some sticky tape or by tightening it slightly more.