1 / 3
Zoro — King of Hell — One Piece Multicolor Lightbox — zdjęcie 1
1 / 3

Zoro — King of Hell — One Piece Multicolor Lightbox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

⚔ Zoro — King of Hell — One Piece Multicolor Lightbox

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Zoro in his most iconic moment, surrounded by manga panels woven around him: backlit, the comic-page effect comes to life, with the lines seeming to carve the light itself. A collector's piece for anyone who brings One Piece into every corner of their home, perfect on a desk or a dedicated shelf. Like the other models, the body is hollow for LED lighting and has the side hole for the switch already built into the design.

🛠 Printing notes and tips (same for all 4 models)

  • Requires AMS: these are multicolor models, so a multi-filament system (AMS or equivalent) is required to achieve the layered result.

  • Layer height: 0.20 mm — a good balance between image detail and print time.

  • First layer speed: 50% — slowing down the first layer is important to ensure solid, even adhesion from the start.

  • Bed preparation (essential): clean the print bed thoroughly, dry it well, and apply glue stick or hairspray/lacquer before starting the print. This step prevents filament lifting in the first layers, the most common issue with large, multicolor pieces like these.

  • Structure designed for internal LED lighting (strip or small bulb) and a side hole to comfortably reach the switch without having to open or disassemble the model.

Tagi