Zoro — King of Hell — One Piece Multicolor Lightbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
⚔ Zoro — King of Hell — One Piece Multicolor Lightbox
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Zoro in his most iconic moment, surrounded by manga panels woven around him: backlit, the comic-page effect comes to life, with the lines seeming to carve the light itself. A collector's piece for anyone who brings One Piece into every corner of their home, perfect on a desk or a dedicated shelf. Like the other models, the body is hollow for LED lighting and has the side hole for the switch already built into the design.
🛠 Printing notes and tips (same for all 4 models)
Requires AMS: these are multicolor models, so a multi-filament system (AMS or equivalent) is required to achieve the layered result.
Layer height: 0.20 mm — a good balance between image detail and print time.
First layer speed: 50% — slowing down the first layer is important to ensure solid, even adhesion from the start.
Bed preparation (essential): clean the print bed thoroughly, dry it well, and apply glue stick or hairspray/lacquer before starting the print. This step prevents filament lifting in the first layers, the most common issue with large, multicolor pieces like these.
Structure designed for internal LED lighting (strip or small bulb) and a side hole to comfortably reach the switch without having to open or disassemble the model.