MacBook MagSafe 3 connector cover (hides bright LED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blocks the bright MagSafe 3 status LED — press-fits onto the connector and stays there (0.1 mm clearance).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
The status LED on Apple's MagSafe 3 connector is surprisingly bright — enough to light up a dark bedroom while your MacBook charges overnight. This cover press-fits onto the connector and stays there permanently: the open ends leave the magnetic face free on one side and let the cable pass through on the other, so you attach and detach the charger as usual with the cover in place.
I liked the original design, but the opening was oversized and it wouldn't stay on the connector, so this remix scales it down to the connector's real dimensions plus 0.1 mm clearance for a tight press fit.
Printing: use a dark, opaque filament with 2–3 perimeters, otherwise the LED will glow through the walls. Stand it on an open end (cavity vertical) — no supports or bridging needed. If it won't press on with your printer's tolerances, a touch of XY compensation (−0.05 mm) or light sanding inside will get it there.
Remixed from: