1 / 2
Ubiquiti UniFi Flex 8 2.5G Structured Media Enclosure Mounting Bracket — zdjęcie 1
1 / 2

Ubiquiti UniFi Flex 8 2.5G Structured Media Enclosure Mounting Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting bracket for the Ubiquiti UniFi Flex 8 2.5G and other devices for structured media enclosures.

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mounting bracket designed to attach a Ubiquiti UniFi Flex 2.5G 8 to a structured media enclosure. The mounting system is the same as the one that comes with the switch, so you can remove the original one and attach this one instead. It also works with the following Ubiquiti devices as well, as it shares the same mounting bracket:

I printed it using Buddy3D PETG with 25% infill and organic supports on the overhangs, and it turned out well. I also used these push lock pins to attach it to the structured media enclosure. Works pretty well with this!

Tagi