EV Type 2 Plug Wall Mount (cFos RFID), hided screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Type 2 Plug with RFID reader
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on Pavels design I created a wall mount with hided screws and RFID option (I have the cFos Wallbox inside the garage and only the cable outside). You have to rotate the base ~46° , then it fits on MK4.
Print the base and cover separately.
The cover needs to be flipped upside down and print with 2 colors if you want to have RFID Logo.
I added base and cover as separate files.
The upper screw needs to be done first, then slide the base over the screw head. The lower screw is hidden behind the cover. Cover needs to be fixed with M5 (Flat/Panhead). If you use the RFID PCB make sure to seal it properly. I added some drain holes but its not IP67...