The Humble carabiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple flexible carabiner for low weight loads.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
DO NOT USE THE CARABINER FOR ANY ACTIVITIES THAT COULD ENDANGER YOU IN CASE OF MODEL STRUCTURAL FAILURE.
This is a simple carabiner modeled in FreeCad, it is flexible so you can open it just by pushing on the external aperture.
The model has also an additional ring on the left side for charms.
The carabiner was made and tested for low weight loads, both PLA+ and PHA versions of the model managed to sustain a vertical static load of 8kg but no further tests have been executed.
The model has been tested with the following materials:
PHA (colorFabb)
PLA+ (eSUN)
I suggest using PHA filament in order to reduce environmental footprint.