Display Stand for 3DBenchy with optional Nameplate & Display Case Support

Give your favourite official 3DBenchy the display it deserves!

This display stand is precision designed around the dimensions of the official 3DBenchy, creating a recessed "water effect" base that securely locates the model while giving it a clean, museum-style presentation. It's perfect for displaying a first Benchy, a printer calibration model, a multi-colour masterpiece, or any special commemorative print.

Three model variants are included:

• 9 mm plaque version for a 9 mm label.

• 12 mm plaque version for a 12 mm label.

• No plaque version for a minimalist display, featuring only the simulated water-effect base and outer frame.

Note: if you don't want to use a label printer (Brother/Dymo etc.) why not add text via your slicer software instead to the plaque area, I'd suggest white text on a black background.

For an even more professional presentation, the stand is designed to accept a 70 mm × 70 mm square mini plastic dessert cup, which acts as a clear protective display cover. These are inexpensive and widely available from many online retailers.

Ideal for:

• First Benchy prints

• Multi-colour 3DBenchy displays

• Printer calibration keepsakes

• Competition entries

• Exhibition or desk displays

• Protecting prized prints from dust with an optional clear cover

Whether you're celebrating your very first Benchy or preserving a one-of-a-kind print, this stand provides an attractive and professional way to showcase the iconic 3DBenchy.

Optional: to secure the Benchy in place, a simple piece of double-sided tape does the trick.

Recommended Print Settings

For the best appearance and print quality, I recommend the following settings:

• Material: PLA

• Colours: I'd suggest black for the outer-border/base, white for the lettering and white boost later under the water level, and to for the center a blue colour (transparent is ideal).

• Water Effect: Use a transparent blue PLA for the centre section to create a realistic water effect around the Benchy.

• Underwater Boost Layer: Print the "WHITE-BOOST-UNDER-WATER" component (located beneath the simulated water layers) in opaque white PLA. This brightens the transparent blue above it and enhances the overall water appearance.

• Infill: 20% Gyroid. The internal pattern subtly shows through the transparent filament, giving the impression of gentle waves beneath the surface.

• Supports: None required. The plaque holder incorporates a slight curve on its upper surface to eliminate the need for support material.

• Nozzle: 0.4 mm

• Layer Height: 0.15 mm recommended. Higher layer heights may cause the recessed "BENCHY" lettering in the base to disappear during slicing, although the model will still print correctly.

• Bed Temperature (PLA): 55 to 65°C (or according to your filament manufacturer's recommendation) just to prevent layer lift at the corners. If you struggle with this usually, adding a brim will not hinder the appearance of the model at preparation stage.

Enjoy.