SEBA FR1 CUFF ECCENTRIC REPLACEMENT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable replacement cuff eccentric for Seba FR1 inline skates.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Seba FR1 Cuff Eccentric
A replacement cuff eccentric for Seba FR1 inline skates.
I designed this part after losing the original eccentric and not wanting to wait for a replacement to arrive.
The model was created from scratch by measuring the original part and has been tested for fit on my own skates.
I’m sharing it for free in case it helps someone get back on wheels a little faster.
Material
The tested part was printed in PETG-CF.
Since this part carries cuff loads, I recommend using durable engineering materials such as:
PETG-CF
PA-CF
PA-GF
Other tough composite filaments
I do not recommend PLA.
Print Settings
0.2 mm layer height
4–5 perimeters
High infill (40–100%)
Print at 100% scale
Print in 45 deg on supports
Disclaimer
This is an independently designed replacement part and is not an official Seba product.
Inspect the printed part before every use and replace it immediately if any cracks, wear or deformation are found.
Use at your own risk.