VKB Gladiator Quick Release - Trak Racer TR80 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount that fits the TR80-2SMEX-FS-UK
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This fits Trak Racer TR80 Flight Sim Control Mounts (TR80-2SMEX-FS-UK). This bolts into the same 3 bolt holes where the large flat mounting plates for the flight sticks do, giving what is in my opinion a more comfortable position for the sticks, as well as adding quick release making it easier to get in and out of the seat. It's designed to make use of the original bolts/nuts that attached the plate. So essentially:
1. Print this
2. Undo 3 nuts/bolts, remove plate
3. Put 3d print where plate was
4. Put 3 nuts/bolts back
Also I can confirm that when mounted in this way the joystick does not collide with the seat when moving it forwards or backwards, it has about 1cm of clearance.