1 / 7
Joker of Doom's Adventure Force Strike Force /Doom Force HVZ Kit — zdjęcie 1
1 / 7

Joker of Doom's Adventure Force Strike Force /Doom Force HVZ Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add plus +50 in tactics to this amazing HVZ/Casual game blaster

Ocena
0 / 5
Polubienia
16
Pobrania
13
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Tactical add-ons for the ultimate (until the next new blaster...Ha!) HVZ blaster.

More details and instructions coming soon eventually but some important notes:

  1. The main rail is very, very prone to warping and most of my usual rail printing tricks did not work for this one. I would print it directly from the 3mf if possible. I know some of the settings may seem odd but it was the only way I could get consistent prints. General settings are low wall and infill settings 4/15% , gyroid infill to distribute the cooling stress better, and turning of cooling for the first few (5?) layers. You'll need to do some post printing cleanup of the mounting holes for the rail (and muzzle). I use a deburr tool, small razor and/or a small round file

  2. The threads and the muzzle are tight and the mounts for the muzzle are very thin to account for the shell geometry. You'll definitely want to apply a thin line of lube (slug slym works) on the threads and work them in before installing the muzzle on the blaster. Don't brute force it, just work the threads by gently screwing back and forth to break them in. Otherwise you'll shear off the mounts on the muzzle. Once lubed and broken in the threads will be secure and feel great and the faux can, can be installed or removed normally.

  3. Warning!!! The included main rail requires the removal/bypass of the jam door safety. Removing this safety can be dangerous and can cause damage to yourself and your blaster so install the rail at your own risk. I may do an alternate rail that includes the jam door safety but it's not a priority for me.

  4. RMR sight is here: https://www.printables.com/model/1802702-rmr-ridiculously-metered-reticle-for-nerf-and-othe

  5. The stock pad is fromXero1Tec on etsy but their store has been inactive for a while now. I may draw my own in a similar style and post it.

  6. Shell matching muzzle break coming soon!

  7. Wire management isn't great inside the shell so I used hot glue for the final build. 

  8. Nameplate is glued in. I used hot glue but epoxy or super glue should be fine too. Just remember to score up the shell so the glue has something to grip on to.

  9. The sight mount versions support RMRs installed toward the front (as pictured), the rear, or it can also take pic rails with 40mm screw spacing like from the Seagull or a lot of other hobby designers for a more raised sight level. I included the mount because I wanted a scout style setup and a large portion of the pic rail isn't as sturdy as I would like it to be due to the internal shell geometry. No need to use it but be careful when tightening sights on other parts of the rail. It's very easy to crush the rail.

  10. PLEASE print your faux can in bright colors or preferably orange. At a minimum add an orange tip to it. Cuz remember: " A brightly colored faux can, can save your real can when out in public!" -Joker of Doom

UPDATE: 2006/09/12

- Added a trimmed version of the main rail to allow full access to the jam door. Note without the jam door switch it can be dangerous and can cause damage to yourself and your blaster so install the rail at your own risk.

- Added a LiPo battery door. I'm waiting on the performance modders to figure out full auto and solenoid builds before I make a complimentary batter tray. For now I'd just trim out the existing AA one to accommodate a LiPo.


Hardware: 

Heat inserts M3x5x4 QTY: 4
M3 X10 countersunk screws QTY: 4

Includes:

Adventure Force Strike Force replacement muzzle with threads and faux suppressor
Adventure Force Strike Force replacement main and front picatinny rail with optional scout scope mount
Adventure Force Strike Force replacement AA battery door
Adventure Force Strike Force replacement LiPo battery door
Adventure Force Strike Force replacement side plate
Adventure Force Strike Force replacement fore grip

Tagi