Sovol Zero Nozzle Brush Relocate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates nozzle brush
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I switched my toolhead to a Dragon burner and the nozzle wouldn't reach the original brush so i moved it to the other side. It uses a 28mmX5.7mm A1 mini nozzle brush from amazon and an 8xM3 bolt and nut to secure it. I will ad a link to the brushes i use. There is also one for the original Sovol Zero brush.
Amazon.com: 8 PCS Lab A1 Mini Silicone Nozzle Brush Accessories,Mini Wiper Silicone Brush Nozzle Cleaning Brush for Bambu Lab A1 Mini 3D Printer Cleaning Tool 3D Printer Parts : Industrial & Scientific
This is the nozzle clean macro I'm using for it
[gcode_macro CLEAN_NOZZLE]
description: Wipe nozzle on brushvariable_temp: 180
variable_brush_x: 162
variable_brush_x2: 163
variable_brush_y_start: 55
variable_brush_y_end: 30
variable_brush_z: 3
variable_wipes: 8
variable_speed: 8000
gcode:
{% set wipes = printer["gcode_macro CLEAN_NOZZLE"].wipes|int %}
{% set half_wipes = wipes // 2 %}
{% set brush_x = printer["gcode_macro CLEAN_NOZZLE"].brush_x|float %}
{% set brush_x2 = printer["gcode_macro CLEAN_NOZZLE"].brush_x2|float %}
{% set y_start = printer["gcode_macro CLEAN_NOZZLE"].brush_y_start|float %}
{% set y_end = printer["gcode_macro CLEAN_NOZZLE"].brush_y_end|float %}
{% set brush_z = printer["gcode_macro CLEAN_NOZZLE"].brush_z|float %}
{% set wipe_speed = printer["gcode_macro CLEAN_NOZZLE"].speed|float %}
{% set nozzle_temp = printer["gcode_macro CLEAN_NOZZLE"].temp|int %}
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
SAVE_GCODE_STATE NAME=CLEAN_NOZZLE_STATE
M117 Heating nozzle...
M109 S{nozzle_temp}
G90
G1 Z10 F3000
G1 X{brush_x} Y{y_start} F12000
G1 Z{brush_z} F1200
# First half at X160
{% for i in range(half_wipes) %}
G1 Y{y_end} F{wipe_speed}
G1 Y{y_start} F{wipe_speed}
{% endfor %}
# Shift to X163
G1 X{brush_x2} F6000
# Second half at X163
{% for i in range(wipes - half_wipes) %}
G1 Y{y_end} F{wipe_speed}
G1 Y{y_start} F{wipe_speed}
{% endfor %}
G1 Z10 F3000
G1 X150 Y50 F12000
RESTORE_GCODE_STATE NAME=CLEAN_NOZZLE_STATE MOVE=0
M117 Nozzle clean complete</code></pre><p></p>
