Navimow off-road wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Segway Navimow H800 H1500 H3000 off-road wheel
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Replace the original wheels and you’ll no longer have to worry about the mower getting stuck on rough or slippery terrain. Taking the wheels off and fitting new ones isn’t exactly easy, but I’m sure you’ll manage it. Use two large flat-bladed screwdrivers.
And, of course, print from TPU, 3 perimeters, at least 1 mm top and bottom surface, 20% gyroid infill. Enabling "Avoid crossing perimeters" will eliminate stringing to a great extent. Print time is approx. 26 hours per wheel, depending on the printer model and exact material used. I used cheap chinese XtandLan TPU and it did great job. It should print well enough without any supports. To get better overhang quality, you can turn on cooling for them (maybe, unconfirmed). I will add some pictures once I have them.