1 / 1
Cessna-AmSafe inertial restraint actuator housing — zdjęcie 1

Cessna-AmSafe inertial restraint actuator housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cessna aircraft had a problem with seats sliding back on takeoff. The fix was an inertial real strap from AmSafe that…

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

Cessna aircraft had a problem with seats sliding back on takeoff. The fix was an inertial real strap from AmSafe that mounted under the seat. The disengage mechanism was the weak part as the whole unit was made of metal except the actuation housing which was plastic. It was mounted right where the rear passengers put their feet and would easily break off leaving the unit unusable. Spare parts were not available and the only solution was to buy a new unit at $600. This is an .stl file of the piece. (experimental use only)

Category: Other

Tagi