Cessna-AmSafe inertial restraint actuator housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cessna aircraft had a problem with seats sliding back on takeoff. The fix was an inertial real strap from AmSafe that…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Cessna aircraft had a problem with seats sliding back on takeoff. The fix was an inertial real strap from AmSafe that mounted under the seat. The disengage mechanism was the weak part as the whole unit was made of metal except the actuation housing which was plastic. It was mounted right where the rear passengers put their feet and would easily break off leaving the unit unusable. Spare parts were not available and the only solution was to buy a new unit at $600. This is an .stl file of the piece. (experimental use only)
Category: Other
