Micro SD Credit Card (x12 cards) (with your custom text)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an organizer for 12 micro sd cards in a credit card form factor. Thickness is 2mm.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
After designing a 2 card organizer (in a full sd card format), i've kind of went over the top and decided to create a 10 cards organizer.
This is an organizer for holding 12 micro sd card in a standard credit card format allowing you to neatly carry your micro sd cards in your wallet.
This model feature keychains holes as well as protecting covers for the micro sd card contacts in order to transport them safely in your camera bag / wallet.
You will have to slightly flex the printed plastic in order to press the micro sd cards in and out.
Thanks to a small lip included in the top of the design, your micro sd cards will stay safe inside this holder.
A small recess allow you to put a small sticker (10x80 mm) if you want to write down informations allowing you to identify your sd cards. You could also use different filament color to identify specific sd cards if you have a multimaterial setup : you'll just have to select the faces you want to color on your slicer since the model include a separation lines allowing easy selection in your slicer.
The round holes allow you to use a keyring or tie this to a thread if you want it allways attached to your gear.
I designed this model in Blender and the .blend file is available so feel free to remix this as long as you mention the original design.
I did my best to make this file editable (see attached pictures). All the text are editable inside Blender and I included a readme that describes the process of modifying this file to include your own text.
I recommand printing this model in the provided orientation of the stl file with a 0.4 mm nozzle and a 0.2 mm layer line. No support needed.
Due to it's small size, this design is a great way to use left hover filament on the ends of spools and turn them quickly into something usefull.