1 / 2
2-Achsen Ausrichtplattform für Laser und Spiegel (2d). (wird gefaltet) — zdjęcie 1
1 / 2

2-Achsen Ausrichtplattform für Laser und Spiegel (2d). (wird gefaltet)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2d-Adujstable base (e.g. for laser-emitters and mirrors), Leveling Platform (to be folded)

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
1
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Die Halterung wird gefaltet, siehe Make!
Fold the bracket; see Make!

it den beiden Inbus-Schrauben M3 kann die Ausrichtung einfach und Exakt eingestellt werden. Materialtechnisch dauert es einige Sekunden, bis sich nach dem Verstellen der Konststoff in seine Form gefunden hat. Daher Geduld beim Einstellen. Unbedingt auf gerade Schrauben achten!
Die Version für den Laser hat eine Aufnahme für 12mm-Laser.

The two M3 Allen screws allow for easy and precise alignment. Due to the nature of the material, it takes a few seconds for the plastic to settle into place after adjustment. Therefore, please be patient during adjustment. Make sure the screws are straight!
The laser version has a mount for a 12mm laser.

Tagi