1 / 10
xiaoWa PCB case for 18650 battery — zdjęcie 1
1 / 10

xiaoWa PCB case for 18650 battery

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for xiaoWa PCB (promicro+e22) with 18650 battery.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

XiaoWa PCB case model (https://github.com/gargomoma/xiaoWa_pcb).

This model is made to actual dimensions and has no tolerances. Please enlarge it before printing to allow for material shrinkage.

No display, no buttons. Only a toggle switch (15mm between holes). The top cover can only be removed with pins or using a 4.5mm fusion-molded bushing and an M2.5 screw.

Please note that the Promicro board must be soldered through the Pin Header with a plastic separator.