1 / 10
xiaoWa PCB case for 18650 battery — image 1
1 / 10

xiaoWa PCB case for 18650 battery

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case for xiaoWa PCB (promicro+e22) with 18650 battery.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

XiaoWa PCB case model (https://github.com/gargomoma/xiaoWa_pcb).

This model is made to actual dimensions and has no tolerances. Please enlarge it before printing to allow for material shrinkage.

No display, no buttons. Only a toggle switch (15mm between holes). The top cover can only be removed with pins or using a 4.5mm fusion-molded bushing and an M2.5 screw.

Please note that the Promicro board must be soldered through the Pin Header with a plastic separator.