Simple M5stack bottom Tab5 + M135 GNSS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Options for m5stack M5Bus attached Modules
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
The M5Tab5 has a port for the M135 GNSS module. However, this leaves a gap and an open back. Simple Bottom & Simple Spacer covers that, giving m3 machine heads enough space to sit flush around the factory bumper
Simple Bottom3 integrates them and discards the factory bumper, allowing a much fatter antenna stalk. I used the second SMA adapter the part included, and ruesed the m2 self taping screws attaching it to the original bumper. It sits a little taller than an installed F550 battery will, but I wanted to make sure the antenna had space. it's also 1mm wider and taller than it strictly needs to be - no forcing the M135 into place.
@aoshimak_888093 never posted the original work to Printables, it came from Thingiverse.