Paramaterized rugged case holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount case holder to various rugged case holders.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is for wall mount storage of various case holders. There is a FreeCad Var set for each that controls the height of each bin. I add 1mm to the height so for the 40mm case a normally use that would be a height of 41mm. I have used this for cases from 20mm to 65mm while printed out of PLA+. The hinges on the cases need to be inset 20mm from the edge to fit fully. Use bins that are 190mm wide which makes for a 164mm spacer bar. The bar is also parameterized to adjust to your needs.
Parts needed
PLA + or similar filament
M5x8mm button head bolts 6 for each pair of holders
M5x8mm button head bolts 4 each for each spacer bar
M5 slot nuts for 2020 extrusion, one for each bolt
2020 extrusion to length