Paramaterized rugged case holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount case holder to various rugged case holders.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is for wall mount storage of various case holders. There is a FreeCad Var set for each that controls the height of each bin. I add 1mm to the height so for the 40mm case a normally use that would be a height of 41mm. I have used this for cases from 20mm to 65mm while printed out of PLA+. The hinges on the cases need to be inset 20mm from the edge to fit fully. Use bins that are 190mm wide which makes for a 164mm spacer bar. The bar is also parameterized to adjust to your needs.
Parts needed
PLA + or similar filament
M5x8mm button head bolts 6 for each pair of holders
M5x8mm button head bolts 4 each for each spacer bar
M5 slot nuts for 2020 extrusion, one for each bolt
2020 extrusion to length