Saddleback V1 Tollhead Change System - for Voron 2.4 stealthburner CNC Tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the first itteration of the Saddleback toolhead changing system compatable with any MGN12H rail printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in ABS or PETG at least 3 wall loops and 15% infill on strength settings, be especially wary of the Belt tensioners as they may become a weak spot
Information: The first iteration to the Saddleback, no weight reductions, no tests, its here, but unrefined, Currently the only models supplied are for the CNC tap Upgrade, but the Moutning template is included should you design your own, currently its only made for the Voron 2.4, with X-axis limit switch mounted to the printer, not the toolhead.
required hardware:
- 10 M3x4 Heatset Inserts
- 6 M3x6 Socket head screws - mounting plate to harness - PLate to CNC Tap (chaoticlabs)
- 4 M3x8/M3x10 - Harness to Carriage
- 4 M3x12 - Mount Carriage to MGN12H rail Carraige
- 4 M3 5mm hex nuts, for belt tensioners
- 4 M3x8 Socket head screws - Belt tensioners
Please note, this is the first version of this project and as such shoud be taken with a grain of salt, if you have suggestions for improvements or issues, I will help to rectify them, this was built off the CAD models provided by Vorons team, and whatever else I could scrounge up, so tolerances may be off, but I tried my best to add wiggle room in troubling areas.
Also, you may need to alter the files for endstops and limit switches as the parts themselves are rather low profile.