1 / 2
Ikea Edefors Glass Door Cabinet plastic gliders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts IKEA 115418 and insert in glass door itself
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Parts IKEA 115418 and insert in glass door itself
Printed in transparent ABS-T (test print in white PLA)
Printing instructions
- turn your temperature a little bit higher for better layer adhesion, print with very fine layer height as this increases structural integrity
- glider 0.4 nozzle, 0.12 layer height, print on side with normal support, 100% infill
- insert 0.4 nozzle, 0.12 layer height, print standing on smallest side with little brim for structural integrity, 100% infill
- wheel 0.4 nozzle 0.08layer height, print smaller side down, 100% infill
