Ender 3 X Axis Belt Chafe Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attempt to mitigate chafing of the belt against the edge of the 2020 extrusion on the motor side of the X axis.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The idea is that if the belt has to rub against something, better it be plastic than the sharp edges of an extrusion. Designed to make an interference fit with the v-slot.
Use the single-guide "dual guide compromise" version to avoid removing the gantry for installation (there's a screw in the way of the second guide,) or the dual-guide version if you don't mind having to take apart the z-bracket. Either way, the motor cover will need to come off during installation.
Update: I've created a version of the dual guide mounting option that won't require any more disassembly than the single guide version. It probably won't be as well fixed in place as the regular dual guide, but I think it's a worthy compromise. So it's called "Dual Guide Compromise."
