INDX Filament Sensor Bowden Adapter ECAS04 - Collet replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use ECAS04 fittings on top, instead of the standard plastic collets.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
I don't have INDX yet and I wanted a way to go ahead and add the sensor block to my PTFE run. The PTFE tubes don't stay put on the top holes without proper sized plastic collets that come with the INDX kit. I bought some online and it turned out to be incompatible, even though they fit so I needed a different solution.
I used the original sensor block to flatten the inner features of the adapter so it fits flat, and added M3x16 screw holes on the outer edge to secure to the sensor. I added the same screw holes on the original sensor. I didn't realize it wasn't embossed with numbers, but it should be easy enough to use a version with numbers in its place.
All updates were done in Prusa Slicer, and the 3mf file is attached if changes (like numbers) need to be made. I have no way to test if the actual sensor mechanism works, but there should be no reason for it not to. I have printed with it attached, so it's perfectly fine for use as is.